Upgrading NEOSYS

From NEOSYS Technical Support Wiki
Jump to navigationJump to search

Prior to Upgrade

When any change is made to NEOSYS, it is the responsibility of the Support staff to test and verify that there are no errors. Proceed to upgrade NEOSYS only after Support staff has tested and confirmed that the new features are working fine. Do NOT install untested versions of NEOSYS under any circumstance.

Upgrading NEOSYS fully

NEOSYS can be upgraded in two ways either the evening before the nightly backup or during the day.

Procedure to upgrade NEOSYS during the day.

  1. Email the management and staff the standard email on upgrade for agreement of time.
  2. Confirm the date and time and inform the staff about the update.
  3. During upgrade make sure all users are logged off and follow the installation procedures.
  4. Once the upgrade is over mail the management and staff the steps they should perform before using NEOSYS.

NEOSYS can also be upgraded with smaller patches by the programmer and this can be done at any time while the users are working

Sample Emails to be sent PRIOR to Upgrading NEOSYS

Any decision or instructions related to upgrading neosys must be in support@neosys.com i.e. please ensure that all emails are sent to clients while mentioning support@neosys.com in cc.

Informing the client of the intention to upgrade

Email all users using Email Users option in Help Menu.

SAMPLE EMAIL - VERSION 1: For Clients with more than 10 users

Dear Team,

NEOSYS needs to be upgraded to its latest version because (give reason).
 
We will upgrade between 9 am – 10am on (the selected date).
 
The upgrade should be done first thing in the morning after the nightly backup, to complete the upgrade in a short time . 

* Please inform all users that they should be logged off during the upgrade. 

Please contact NEOSYS support immediately if you have any concerns about the upgrade.

SAMPLE EMAIL - VERSION 2: For Clients with 5 to 10 users

Dear Team,

Due to (give reason), NEOSYS system will be down for maintenance/upgrade and not available without further notice at the following time.

        Today/23rd February, 1:00pm to 2:00pm (time zone) 

* Please inform all users that they should be logged off during the upgrade. 

The upgrade should be done first thing in the morning after the nightly backup, to complete the upgrade in a short time .  
Contact NEOSYS support immediately if you have any concerns about the upgrade.

We will notify you immediately once the work is complete.

SAMPLE EMAIL - VERSION 3: For Clients with less than 5 users

Dear Team,

Due to (give reason), NEOSYS system will be down for maintenance/upgrade and not available without further notice at the following time.

        Tomorrow/23rd February, 9:00am to 10:00am (time zone) 

* Please inform all users that they should be logged off during the upgrade. 

We will notify you immediately once the work is complete.

Downloading

Latest version of NEOSYS is available at http://www.neosys.com/support/neosys2.exe

In NEOSYS servers housed at client location, download neosys2.exe using IE in NEOSYS\downloads folder and rename it to neosys2-(DATE).exe (eg neosys2-10th November 2009.exe) - this is to keep track of the various downloads we do for the client and also allows to install a previous version if needed.

In situations where NEOSYS hosts clients in its own servers, download neosys2.exe into your computer first. Then copy-paste it into the server using SFTP in Tunnelier.

*** IMPORTANT: DO NOT RUN/EXECUTE THE NEOSYS EXE FILE NOW ***

Downloading previous versions of NEOSYS

The 9 previous versions of neosys are stored at:

http://www.neosys.com/support/neosys21.exe

http://www.neosys.com/support/neosys22.exe

http://www.neosys.com/support/neosys23.exe

http://www.neosys.com/support/neosys24.exe

http://www.neosys.com/support/neosys25.exe

http://www.neosys.com/support/neosys26.exe

http://www.neosys.com/support/neosys27.exe

http://www.neosys.com/support/neosys28.exe

http://www.neosys.com/support/neosys29.exe


Backing up prior to upgrading

THIS WHOLE BACKUP PROCEDURE IS MANDATORY

Make sure that all NEOSYS users are logged off and the processes are closed before you do any folder copying.

The upgrade procedure includes taking a copy of the programs. If the upgrade fails due to some reason, the NEOSYS folder can be reverted back to how it was before the upgrade attempt. If this is done by coping the programs back to the original location then no authorisation number will be required. The directories that contain the programs are:

  • D:\NEOSYS\NEOSYS
  • D:\NEOSYS\NEOSYS.NET
  • D:\NEOSYS\NEOSYS.MAC or D:\NEOSYS\NEOSYS.W3C

Small Installations

  1. Take a normal proper backup using the NEOSYS Support Menu - for all live databases if there is more than one.
  2. If a USB change was made by the client's IT person prior to doing this manual backup, ensure that after the upgrade is done, the backup file for that manual backup is moved to another location (preferably in a new folder on the D drive)so that the clients backup cycle is not affected by the existence of a days backup in the USB before the cycle actually begins the following morning.
  3. Take a copy of the whole of the D:\NEOSYS folder (or where-ever NEOSYS is installed) into another folder. This way, if the upgrade fails due to some reason, the NEOSYS folder can be reverted back to how it was before the upgrade attempt. You can omit the D:\NEOSYS\IMAGES and D:\NEOSYS\LOGS folders from the copy to save time. Preferably place the copy on another disk or partition so that it is not included in any whole disk backup that might be running in parallel to NEOSYS backup.

Large Installations

This includes multiple installations on the same server eg NEOSYS hosts.

Copying the whole of the D:\NEOSYS folder can take so much time as to be virtually impossible. In this case do the upgrade EARLY IN THE MORNING since all the data will have been backed up the previous night. The NEOSYS nightly backup only backs up data, so you MUST manually take copies of the program folders mentioned above.

Installing

PRECAUTION: DO NOT install versions of NEOSYS older than the one currently installed, even by mistake. LOOK CAREFULLY at the version note when you open the upgrade file.

Run / Execute the .EXE file that you downloaded into the NEOSYS\downloads folder and Install to D:\NEOSYS\ .

Closing NEOSYS processes should happen automatically during upgrade but you can also do it manually as follows:

Closing NEOSYS Services

The installation procedure first creates a GLOBAL.END file in the NEOSYS programs folder causing all serving processes to terminate. Maintenance processes must be terminated manually.

Next, the installation procedure attempts to update the WAITING.EXE file and, if the processes haven’t terminated quickly enough, this will fail asking for retry or abort. Retry immediately or once all the processes have terminated.

The last step of the installation procedure is to delete the GLOBAL.END file to allow processes to start normally.

Post installation steps

New versions of the software sometimes perform quick or long database conversions.

Starting NEOSYS in maintenance mode immediately after upgrading leaves you more in control if anything goes wrong.

It is not necessary to use the maintenance mode to start-up once after upgrading and before starting an automatic neosys process.

If the upgrade is known not to require users to clear their cache (because there is no change in the user interface) then BEFORE starting any NEOSYS process, enter maintenance mode and when asked if you want to email users about the upgrade, select No.

NEOSYS version

You can check the current version of NEOSYS under Menu>Help>About. After an upgrade, changes in the server process software causes an increment in the version date. Unfortunately changes in the NEOSYS user interface only does not always cause an increment in the version date

Email sent to the Clients after an upgrade

On starting a NEOSYS process or maintenance mode after an upgrade, NEOSYS will automatically email all the users something like the following:

The NEOSYS system software has been upgraded	
	
Before you login to NEOSYS, please follow the instructions at	
http://userwiki.neosys.com/index.php/cache to avoid error using NEOSYS.	
	
Please email SUPPORT@NEOSYS.COM for any assistance.	
	
This is an automated email. You cannot reply to it.

Currently this email is only sent to the users in the *first* database started. If there are other live databases in the same NEOSYS installation that users should be emailed then you can trigger the email in maintenance mode for the desired database as follows:

EMAILUSERS UPGRADE

Sample email to be sent to clients who face issues due to failure in clearing browser cache

Dear XYZ,

You are facing this error because you have not cleared your browser cache as instructed, after NEOSYS was upgraded recently. 
In order to resolve this issue please follow instructions in the following wiki link:

http://userwiki.neosys.com/index.php/Cache

Troubleshooting

If you choose to abort the installation for any reason then the GLOBAL.END file will have to be deleted manually since its presence prevents any processes from starting up.

Upgrading NEOSYS with patch files

Patch files can be used to update a very recent installation of neosys without doing a full install and without getting people out of NEOSYS.

WARNING: DO *NOT* INSTALL OLDER PATCH FILES ON NEWER VERSIONS OF NEOSYS

Only install patch files dated after the NEOSYS software version date. If in doubt, do a full install.

  1. Copy the file which is probably something like ADAGENCY.1 or ACCOUNTS.1 to the neosys\neosys folder
  2. Open Maintenance Mode and Press F5
  3. Type the command to install the patch as follows:
    If the filename of the patch file is ADAGENCY.1 then type
    INSTALL ADAGENCY
    If the filename of the patch file is ACCOUNTS.1 then type
    INSTALL ACCOUNTS
  4. Follow instructions on screen

Quick Upgrade

In certain cases, we may have to perform an upgrade during client's working hours without causing much delay to client for certain minor bug fixes. In such a situation there are no upgrade emails sent prior to upgrading the client and consequently we are not asking the users to log off from the system.

Procedure:

  1. Backup the NEOSYS folder.
    • Go to the folder where NEOSYS is installed and do select all, copy & paste i.e. ctrl+a , ctrl+c & ctrl+v
  2. Download the latest version of NEOSYS from http://www.neosys.com/support/neosys2.exe in NEOSYS\downloads folder and rename it to neosys2-(DATE).exe
  3. Run the exe file
  4. Restart NEOSYS processes on the server immediately after the installation has completed!