Troubleshooting email not received: Difference between revisions

From NEOSYS Technical Support Wiki
Jump to navigationJump to search
Line 93: Line 93:
=== Check the size of the mail being sent to client's email account===
=== Check the size of the mail being sent to client's email account===


Email could be missing due to the reason that NEOSYS mail exceeds the upper limit of mail size on client mail server. Ask client's IT to increase the upper limit of mail size that can be received by their mail server.
Email could be missing due to the reason that NEOSYS mail exceeds the upper limit of mail size on client mail server. Confirm the upper limit of mail size with client IT and check the size of email being sent by NEOSYS. For large clients a whole years report could exceed 10MB, which is the common upper limit for most mail servers. Ask client's IT to increase the upper limit of mail size to receive emails with large report from NEOSYS. NEOSYS staff can advise users to test a report attached email for a small period to check if emailed reports can actually be received by client's email or not.


=== Check low level network connectivity to the mail server ===
=== Check low level network connectivity to the mail server ===

Revision as of 11:17, 26 November 2013

Troubleshooting email not received

Was any email actually sent?

Possibly the server was switched off at the time the email was supposed to be sent. Check the server uptime or logs. Check NEOSYS server monitor history.

Rerun the report or program with the exact same options and conditions. Monitor the process on the server maintenance screen looking for messages that emails have been sent or not.

Check log for any problems sending email

  1. First step is Login to client’s server, open NEOSYS check the logs in support menu.
  2. It will generate the log report, check the report thoroughly and see if there is any error shown around the time that the emails were supposed to be sent.

Error: No logs found

No logs found for the date while checking the logs in support menu.

Error explained: This above error means that no error has been logged on the date you selected.

Error: Failed to connect to the server

001.png

If report shows the error shown above then do the following steps to check why the email was not sent out.

This above error means that but the mail could not be sent due to an inability to connect to the outgoing email server.

See Solving NEOSYS smtp server failure

Check NEOSYS email configuration

NEOSYS needs to know how to send email. The default configuration is mailout.neosys.com 2500

Check the configuration in NEOSYS Support Menu, System Configuration File.

Send a test email

WARNING This test requires a version of NEOSYS later than 5th Dec 2012 otherwise no error message is shown in some cases when there is in fact an error.

Check if you can send a test email. Go to maintenance mode and press F5 then type the following.

sendmail support@neosys.com

If mail server accepts the message then you will see the following.

This is no guarantee that the mail server can or will deliver the email to the recipient.

╔═════════════════════════════════════════════════════════════════╗
║ Step 1 OK. Mail for SUPPORT@NEOSYS.COM accepted by mail server. ║
║                                                                 ║
║       Step 2. Now check if actually received by recipient       ║
║           to verify that the mail server can actually           ║
║               deliver email to SUPPORT@NEOSYS.COM               ║
║                                                                 ║
║                        < Press any key >                        ║
╚═════════════════════════════════════════════════════════════════╝

If there is some problem connecting to the mail server then you might see something like the following:

╔══════════════════════════════════════════════════════════════╗
║ SUPPORT@NEOSYS.COM                                           ║
║ Error in sendmail.js, CDO.Message.Send(). The transport      ║
║ failed to connect to the server.                             ║
║                                                              ║
║ From:   companyxyz@neosys.com                                ║
║ To:     support@neosys.com                                   ║
║ Server: mailout.neosys.com                                   ║
║ Port:   2500                                                 ║
║                      < Press any key >                       ║
╚══════════════════════════════════════════════════════════════╝

To solve unreliable connections to NEOSYS email server, see Solving NEOSYS smtp server failure

Invalid Sender Email Address in NEOSYS System Configuration File

The following problem might indicate that the "Sender email address" is not acceptable to the mail server - even though the message mentions a problem with "recipient addresses".

For sending email via the default NEOSYS mailout.neosys.com server the "Sender Email Address" MUST end in @neosys.com eg companyxyz@neosys.com.

╔══════════════════════════════════════════════════════════════╗
║ SUPPORT@NEOSYS.COM                                           ║
║ Error in sendmail.js, CDO.Message.Send(). The server         ║
║ rejected one or more recipient addresses. The server         ║
║ response was: 550 Administrative prohibition                 ║
║                                                              ║
║ From:   neosys@companyxyz.com                                ║
║ To:     support@neosys.com                                   ║
║ Server: mailout.neosys.com                                   ║
║ Port:   2500                                                 ║
║                      < Press any key >                       ║
╚══════════════════════════════════════════════════════════════╝

Check the size of the mail being sent to client's email account

Email could be missing due to the reason that NEOSYS mail exceeds the upper limit of mail size on client mail server. Confirm the upper limit of mail size with client IT and check the size of email being sent by NEOSYS. For large clients a whole years report could exceed 10MB, which is the common upper limit for most mail servers. Ask client's IT to increase the upper limit of mail size to receive emails with large report from NEOSYS. NEOSYS staff can advise users to test a report attached email for a small period to check if emailed reports can actually be received by client's email or not.

Check low level network connectivity to the mail server

To test if there is basic connectivity - from the client server to the configured email server, type the following in command prompt, on the client server.

You might need to install Windows option for Telnet on Windows 2008. A software firewall installed on the workstation may block connections selectively by program so you might be able to send email by telnet but not by outlook for example.

Assuming that the configuration is the default of mailout.neosys.com port 2500. You must use your configuration.

telnet mailout.neosys.com 2500

it will show you

Connecting to mailout.neosys.com ...

Successful connection

Blank window with some text at the top. This text can vary slightly but will usually mention SMTP somewhere.

220 mailout.neosys.com ESMTP Postfix (Ubuntu) 

Try to send an email using telnet as shown below. Type the bits in bold in the following with no mistyping since backspace doesn't work.

220 mailout.neosys.com ESMTP Postfix (Ubuntu)
helo steve
250 mailout.neosys.com 
mail from:<clientname@neosys.com> (use client name which is appropriate to the situation to identify sender)
250 2.1.0 Ok
rcpt to:<support@neosys.com>  (use a recipient email ID which is appropriate to the the situation)
250 2.1.5 Ok
data
354 End data with <CR><LF>.<CR><LF>
Testing
Testing (don't forget to end with a dot on a new line)
.
250 2.0.0 Ok: queued as 872B21F6
quit
221 2.0.0 Bye
Connection to host lost.

Unsuccessful connection

If there is some network connection problem or the mail server is not running then after a while it will show something like:

Could not connect to the host, on port 2500: Connect failed

If you determine that there is a basic problem connecting to the mail server then and other locations are not facing the same problem then contact the IT administrator of the network and probe if they have outgoing ports (2500 in this case) blocked or filtered on their firewall.

See Solving NEOSYS smtp server failure

Ensure missing email is not being treated as spam by NEOSYS email server

Email could be missing due to the reason that NEOSYS mail server might be treating it like spam. Escalate issue to NEOSYS IT, who will check if missing email is being treated as spam.