Troubleshooting NEOSYS Generally

From NEOSYS Technical Support Wiki
Revision as of 19:08, 2 March 2007 by Steve (talk | contribs)
Jump to navigationJump to search

Handling damaged files


Troubleshooting Internet Explorer

Troubleshooting IE


Resolving slow speed

Benchmarking NEOSYS

Cause and Solution of Backup Warning Messages

NEOSYS gives a backup WARNING message whenever it discovers that it is overwriting backups a week old. It does this because NEOSYS only deems backups completely successful if the backup media is rotated at least on a weekly basis.

If the backup media is removable then it should be changed daily or weekly and the same media not used repeatedly on successive weeks.

If the backup is going to non-removable media (even if it is a shared folder on another computer) then the NEOSYS user/client/licencee (not the NEOSYS support team) can, at their own responsibility, arrange to move (not copy) the NEOSYS backup files from that location to a backup location of their choice and avoid this WARNING message.

Checking for corrupt database files

Login to NEOSYS Maintenance

Press F5

CHK.FILES {filename}

Error Message: Somebody else was using the dataset

Server=NEOSYS
Client=NEOSYS
User=ADAGENCY
NEOSYS Ver:18:02:13  30 MAY 2006

Backup started at 19/11/2006 2:00am

TEST DATA TESTDATA

To E:\DATA.BAK\TESTDATA\Sunday\BACKUP.ZIP
!!! THE BACKUP HAS FAILED !!!

(because one or more files were not backed up
 - somebody else was using them)

Error Explained

Despite the error message which shows that 'somebody else was using them', it is definately not correct as NEOSYS shuts down automatically at 2 am (time of the backup). The actual problem might be that a NEOSYS process must have got stuck and failed to shutdown or a maintenance process was left open by accident.

Action to be taken

Close any maintenance processes that should not have been left open in the first place.

Try to exit normally or kill any other "hung" processes, taking screenshots of any error messages in order to try and prevent the problem happening again.

If not inconvenient to the users consider initiating a manual backup or just check that the next automatic backup works ok.

Error Message: Size Lock

Server=NEOSYS-SERVER
Client=NEOSYS-SERVER
User=NETSERVICE
NEOSYS Ver:19:57:50  08 NOV 2006

Backup started at 19/11/2006 2:00am

ADLINE ADLINE

To F:\DATA.BAK\ADLINE\Sunday\BACKUP.ZIP
The following files had a size lock but have been fixed SHADOW Warning! Process 
U79068                                                      
Other Network Stations are Active!
This utility was designed to be run in a single-user mode!

Potential Errors Could Occur, If You Proceed to fix the sizelock Values with Other Stations   
Active.  These Errors Include;

Invalid SELECT results, Degredation in Network Performance, and other Problems/Concerns which 
may be specific to your Installation/Application.

IT IS STRONGLY RECOMMENDED THAT ALL NETWORK STATIONS BE LOGGED OUT BEFORE PROCEEDING!

Do you wish to Proceed at this time?%B%
!!! THE BACKUP HAS FAILED !!!

(because one or more files were not backed up
- somebody else was using them)

Error Explained

Sizelock errors are not critical and do not stop the backup from being performed. Sizelocks are cleared automatically during backup but the backup alert becomes a warning that the backup was not quite perfect.

Sizelocks during database checking indicate that some files were not properly closed in normal processing but do not indicate corrupt files. Sizelock means that a file is prevented from expanding and contracting. Expanding and contracting is necessary in order to speed up access to larger numbers of records. Therefore if sizelocks were to be left uncleared then the file would become slower and slower to access over time.

In the above example the backup was not completed because of another error "files in use".

Action to be taken

If an automatic backup then no action is required since the sizelocks are automatically cleared.

During a manual backup then you should press F9 on the sizelock warning screen to confirm that the sizelocks should be cleared.

Sizelocks can only be cleared if no other process is open.

Resolving permissions errors while logging in

Problem

While logging in, you get the following error message: Login error message.jpg

Solution

Add the internet guest account to the security list of the data folder with the default permission of list/read/write

Make sure the read&execute permission is removed Permissions on data.jpg


Enabling File Security option on Win XP Professional

Problem

In the Properties of any folders, the Security option does not show, hence you cannot modify the Read, Write options.

Solution

The solution would be to untick the 'Simple File Sharing' option from Tools > Folder Options > View: Simplefilesharingoff.jpg