Setting up HTTPS: Difference between revisions

From NEOSYS Technical Support Wiki
Jump to navigationJump to search
 
(68 intermediate revisions by 11 users not shown)
Line 1: Line 1:
== Creating a single HTTPS web site ==
== Setting up HTTPS for NEOSYS website ==


=== Creating a site in IIS ===
CAUTION: When importing certificates on servers that are not owned by NEOSYS you MUST NOT check the "allow certificate export" option otherwise anybody with access to the server can steal the NEOSYS certificate and pass off their own servers as NEOSYS certified.


In order to run on the same port number, IIS sites need either unique ip numbers (set in tcp/http *and* ssh/https settings) or different host header values.
NEOSYS has a very simple way of enabling https for all the clients. Every client has been set up with domain name " *.hosts.neosys.com " where "*" is the clientname.


Therefore either the ip number has to be one of the available ones provided to neosys by leaseweb etc. or the host header value must be set to '''clientname'''.hosts.neosys.com.
Pre prepared certificate for *.hosts.neosys.com web sites is present on the nl10r/win3 server. The certificate is signed by COMODO and supports SHA2 security algorithm. It is portable, ensures authenticity and is widely supported. Also refer to [http://itwiki.neosys.com/index.php/SSL_certificate SSL certificate]


The port number for tcp/http should be the neosys standard arbitrary port of 8123, not port 80 in order to prevent access via standard http. We could use various almost arbitrary ports for http since they are going to blocked by tcp/ip filtering or a firewall but it is better to know that port 8123 is the only one since IIS insists on having some port open for http.
If a client's URL is not as per NEOSYS standards, but has been in use for many years, do not change the URL without a good enough reason.


The https options are only available after running selfssl (see below) at least once on the server.
=== Creating a single HTTPS web site on Windows 2008 ===


[[Image:httpadvancedwebsitesetup.png]]
To create a single HTTPS web site on Windows 2008, follow three simple steps:


=== Install ssl/https on the site. ===
#Copy the "*.hosts.neosys.com.pfx" certificate saved in d:\hosts\certificates on win3 to the server (password to be used is present in a text file in the same folder).
#Import the certificate to IIS without option to export and MUST be deleted after import. See [http://techwiki.neosys.com/index.php/Setting_up_HTTPS#Steps_to_follow_while_importing_certificate_and_why Importing certificate in IIS] for details.
#Click on Sites > Client Web Site > Bindings. In the Bindings section - click on Add and select https, All Unassigned IP addresses, port 4430 and select the certificate from the drop down and click OK.


install selfssl.exe from Microsoft site (iis60rkt.exe available in neosys nl1 download folder) only the ssl utility is needed.
[[image:sslwin2008-2.jpg]]
[[image:sslwin2008-3.jpg]]


http://www.microsoft.com/downloads/details.aspx?FamilyID=56fc92ee-a71a-4c73-b628-ade629c89499&displaylang=en
[[image:sslwin2008-4.jpg]]


then
Test the site from explorer to make sure it works.


[[Image:SelfSSL.png]]
=== Creating a single HTTPS web site on Windows 2003 ===


C:\Program Files\IIS Resources\SelfSSL>selfssl /v:9999 /s:'''''866651215''''' /p:4430 /n:CN='''''clientname'''''.hosts.neosys.com
*Copy the "*.hosts.neosys.com.pfx" certificate saved in d:\hosts\certificates on win3 to the server. (password to be used is present in a text file in the same folder)
Microsoft (R) SelfSSL Version 1.0
*Click on Sites > Properties > Directory Security > Server certificate. Follow the steps in the wizard to import/bind the certificate to port 4430. See [https://support.microsoft.com/en-us/kb/816794 Installing imported certificate in Windows 2003 IIS] for detailed steps to import.
Copyright (C) 2003 Microsoft Corporation. All rights reserved.
Do you want to replace the SSL settings for site 866651215 (Y/N)?y
The self signed certificate was successfully assigned to site 866651215.


/v:9999 means valid for 9999 days
=== Creating multiple HTTPS web sites on NEOSYS hosted server ===
/s:'''''866651215''''' is the site number in this case  (site number is shown in IIS management screen)
/p:4430 is the non-standard port number neosys uses by convention for ssl/https instead of the standard 443
/n:CN='''''clientname'''''.hosts.neosys.com indicates the full domain name of the site


You probably made a mistake in the site number if you get the following message.
All clients hosted on NEOSYS servers use the same IP address but unique HTTPS port numbers starting from 4431 onwards. The unique port number should be one greater than the highest port number available on the server under IIS manager -> NEOSYS ->Sites.  


Error opening site metabase key: 0x80070003
*Click on Sites > Client Web Site > Bindings. In the Bindings section - click on Add and select https, All Unassigned IP addresses, port 4430 and select the "*.hosts.neosys.com.pfx" certificate from the drop down and click OK.


=== Testing access to the new https web site. ===
Since the http access is not required for any Client on NEOSYS hosted server, this step of https binding can be performed while creating the client website as shown in the screen shot below.


Make a subdomain '''clientname'''.hosts.neosys.com
[[image:IISwin3.png]]


https://'''clientname'''.hosts.neosys.com:4430/neosys
=== Steps to follow while importing certificate and why ===


If you get certificate error:
#It MUST be imported  WITHOUT OPTION TO EXPORT and
#It MUST be deleted after import.


#check that the selfsll /n:CN='''clientname'''.hosts.neosys.com matches the domain name used in IE
It is especially important to keep pfx files off clients own servers because they are commonly directly exposed to potentially infected employees computers and/or personal devices via the corporate LAN so they may be far less secure than NEOSYS own servers which are reasonably well isolated. If a pfx file is obtained by criminal hackers, perhaps using automated tools, and the pfx password guessed, brute forced, or broken in some way, the keys contained could in principle be used against us or our clients. If the pfx file is a wildcard that supports any subdomain, then loss in one place could affect others. The chances of all this happening is probably very low but NEOSYS needs to be prepared to pass IT audits and leaving keys around will be viewed as having a culture of low security standards.
#install the certificate into the client computer (double click the padlock, view certificates etc)


closing all internet explorer versions and restarting is necessary for installed certificates to become effective.
==Setting up HTTPS for installations with more than 1 database==


== Creating multiple HTTPS web sites ==
In cases where there are multiple databases within the same installation, you can use the same website to access all the databases. In case the Client asks for separate domain names for multiple databases, use the same steps as explained in [[Setting_up_HTTPS#Setting_up_HTTPS_for_NEOSYS_website|Setting up HTTPS]] as the case maybe.


=== Bugs ===
==Setting up HTTPS for installations where outside office access is usually restricted==


SelfSSL allows only one website to have SSL at a time
During a new installation, support staff MUST import the certificate to IIS, bind the certificate to NEOSYS website (following the steps mentioned above in [[Setting_up_HTTPS#Creating_a_single_HTTPS_web_site_on_Windows_2008|Creating a single HTTPS web site]]) and test if NEOSYS can be accessed via https on the server (https://localhost:4430), so that no problems are faced in future if the client ever requests for outside access with their management's approval.


IIS Diagnostics Toolkit which has fixed SelfSSL but doesnt allow full control
Since the client management has informed that outside access is not required, close the server's port 4430 (i.e. remove 4430 from Windows Firewall exceptions). Do not remove the certificate binding in IIS.
http://www.microsoft.com/windowsserver2003/iis/diagnostictools/default.mspx


=== Solution ===
If and when https access is required by the client, this can be enabled by unblocking the server's port 4430 and instructing the client to get their IT to configure the router to port forward port 4430 for https.


Use selfssl as follows:
== Troubleshooting setup of multiple HTTPS websites ==


#create certificate for a site in selfssl following the normal procedure
=== Error while binding COMODO signed certificate to NEOSYS website===
#export the certificate to a pfx file (IIS->Site->directory security->server certificate wizard)
#remove the certificate (IIS->Site->directory security->server certificate wizard)
#import pfx certificate back (IIS->Site->directory security->server certificate wizard)


Continue adding sites this way and they should work perfectly fine. Just follow the sequence here for each site being added.
[[image:Test11.jpg]]


=== Re-installing Certificates ===
A specified logon  session does not exist. It may already have been terminated.


Sometimes due to an unknown issue, site/s stop working and hence there is a need to re-install the site certificate. The following procedure to be followed (actually we follow the same procedure as install, but step 1 is to delete the existing certificate):
If importing a certificate ONCE at the top level onto a NEOSYS controlled server with multiple web sites then you need to mark the "Allow this key to be exported" checkbox when importing the certificate to IIS.
 
==== Re-installing Certificates from selfssl ====
 
#Delete the existing certificate (IIS->directory security->server certificate wizard)
#create certificate for site in SELFSSL
#export the certificate to a pfx file (IIS->directory security->server certificate wizard)
#remove certificate from site (IIS->directory security->server certificate wizard)
#import pfx from step 3 using same wizard
#Done
 
==== Re-installing Certificates from saved PFX files ====
 
#Delete the existing certificate (IIS->Site->directory security->server certificate wizard)
#import pfx certificate (IIS->Site->directory security->server certificate wizard)
#Done

Latest revision as of 10:15, 4 February 2019

Setting up HTTPS for NEOSYS website

CAUTION: When importing certificates on servers that are not owned by NEOSYS you MUST NOT check the "allow certificate export" option otherwise anybody with access to the server can steal the NEOSYS certificate and pass off their own servers as NEOSYS certified.

NEOSYS has a very simple way of enabling https for all the clients. Every client has been set up with domain name " *.hosts.neosys.com " where "*" is the clientname.

Pre prepared certificate for *.hosts.neosys.com web sites is present on the nl10r/win3 server. The certificate is signed by COMODO and supports SHA2 security algorithm. It is portable, ensures authenticity and is widely supported. Also refer to SSL certificate

If a client's URL is not as per NEOSYS standards, but has been in use for many years, do not change the URL without a good enough reason.

Creating a single HTTPS web site on Windows 2008

To create a single HTTPS web site on Windows 2008, follow three simple steps:

  1. Copy the "*.hosts.neosys.com.pfx" certificate saved in d:\hosts\certificates on win3 to the server (password to be used is present in a text file in the same folder).
  2. Import the certificate to IIS without option to export and MUST be deleted after import. See Importing certificate in IIS for details.
  3. Click on Sites > Client Web Site > Bindings. In the Bindings section - click on Add and select https, All Unassigned IP addresses, port 4430 and select the certificate from the drop down and click OK.

Sslwin2008-2.jpg Sslwin2008-3.jpg

Sslwin2008-4.jpg

Test the site from explorer to make sure it works.

Creating a single HTTPS web site on Windows 2003

  • Copy the "*.hosts.neosys.com.pfx" certificate saved in d:\hosts\certificates on win3 to the server. (password to be used is present in a text file in the same folder)
  • Click on Sites > Properties > Directory Security > Server certificate. Follow the steps in the wizard to import/bind the certificate to port 4430. See Installing imported certificate in Windows 2003 IIS for detailed steps to import.

Creating multiple HTTPS web sites on NEOSYS hosted server

All clients hosted on NEOSYS servers use the same IP address but unique HTTPS port numbers starting from 4431 onwards. The unique port number should be one greater than the highest port number available on the server under IIS manager -> NEOSYS ->Sites.

  • Click on Sites > Client Web Site > Bindings. In the Bindings section - click on Add and select https, All Unassigned IP addresses, port 4430 and select the "*.hosts.neosys.com.pfx" certificate from the drop down and click OK.

Since the http access is not required for any Client on NEOSYS hosted server, this step of https binding can be performed while creating the client website as shown in the screen shot below.

IISwin3.png

Steps to follow while importing certificate and why

  1. It MUST be imported WITHOUT OPTION TO EXPORT and
  2. It MUST be deleted after import.

It is especially important to keep pfx files off clients own servers because they are commonly directly exposed to potentially infected employees computers and/or personal devices via the corporate LAN so they may be far less secure than NEOSYS own servers which are reasonably well isolated. If a pfx file is obtained by criminal hackers, perhaps using automated tools, and the pfx password guessed, brute forced, or broken in some way, the keys contained could in principle be used against us or our clients. If the pfx file is a wildcard that supports any subdomain, then loss in one place could affect others. The chances of all this happening is probably very low but NEOSYS needs to be prepared to pass IT audits and leaving keys around will be viewed as having a culture of low security standards.

Setting up HTTPS for installations with more than 1 database

In cases where there are multiple databases within the same installation, you can use the same website to access all the databases. In case the Client asks for separate domain names for multiple databases, use the same steps as explained in Setting up HTTPS as the case maybe.

Setting up HTTPS for installations where outside office access is usually restricted

During a new installation, support staff MUST import the certificate to IIS, bind the certificate to NEOSYS website (following the steps mentioned above in Creating a single HTTPS web site) and test if NEOSYS can be accessed via https on the server (https://localhost:4430), so that no problems are faced in future if the client ever requests for outside access with their management's approval.

Since the client management has informed that outside access is not required, close the server's port 4430 (i.e. remove 4430 from Windows Firewall exceptions). Do not remove the certificate binding in IIS.

If and when https access is required by the client, this can be enabled by unblocking the server's port 4430 and instructing the client to get their IT to configure the router to port forward port 4430 for https.

Troubleshooting setup of multiple HTTPS websites

Error while binding COMODO signed certificate to NEOSYS website

Test11.jpg

A specified logon  session does not exist. It may already have been terminated. 

If importing a certificate ONCE at the top level onto a NEOSYS controlled server with multiple web sites then you need to mark the "Allow this key to be exported" checkbox when importing the certificate to IIS.