Installing NEOSYS

INSTALLING NEOSYS SERVICE

Main installation:

Downloading and running installation files

1. http://www.neosys.com/support/accounts.exe Install to X:\Neosys
2. http://www.neosys.com/support/adagency.exe Install to X:\Neosys

Creating shortcuts

Make desktop shortcut ‘Maintenance’ from X:\Neosys\Neosys\Adagency.bat

Activating NEOSYS using authorization number

Start NEOSYS Maintenance and it will give a “Computer Number” and ask for an “Authorisation No”

Send the computer number to NEOSYS admin to get the authorization no.

If you cannot get the authorization number immediately then you can close NEOSYS and when you reopen NEOSYS it will still give the same computer number and accept the same authorization number.

Installing initial Database

First time entering maintenance you will enter a command box (like NEOSYS F5)

Type FILEMAN and then restore. You will need a BACKUP.ZIP file in C:\ containing the initial database.

Creating a .CMD file to start NEOSYS Service:

In x:\neosys create a file startmain.cmd

x:
cd \neosys\neosys
Start neosys.js /system ADAGENCY /database databasecode /user NETSERVICE /pass NETSERVICE

(where databasecode is the code of the database)

In x:\neosys create a file starttest.cmd

x:
cd \neosys\neosys
Start neosys.js /system ADAGENCY /database testdatabasecode /user NETSERVICE /pass NETSERVICE

(where testdatabasecode is the code of the testdatabase)

Differences for Pure Accounts Module Only Installations

Accounts module only has a slightly different startup command. In the above, replace /system adagency with /system accounts to startup a service and use accounts.bat instead of adagency.bat to start up maintenance. Other than that, accounts module setup is identical. Pure accounts clients are very few and tend not to upgrade often so care needs to be taken when upgrading. Upgrade is perhaps surprisingly done using the adagency.exe file.

Creating a .CMD file to copy maindata to testdata

In x:\neosys create a file copymain2test.cmd

Xcopy x:\neosys\data\maindatabasecode x:\neosys\data\testdatabasecode /s /y

Setting up daily scheduled tasks

Maindata – 3 processes starting 6:00 am, 6:01 am, 6:02 am

Testdata – 1 process at 6:04 am

Copy Maindata to Testdata – 1 process at 2:45 am

For multiple sites on the same computer put the second site starting five minutes later at 6:05, third site starting five minutes earlier at 5:55, the third site starting five minutes later at 6:10 and so on.

Measuring the speed of NEOSYS

In NEOSYS maintenance press F5:

Filespeed Measures the speed at to create and delete a file with 1000x1Kb records - lower time is better

Procspeed Measures the processor speed – higher speed is better

Memspeed Measures the memory speed – higher speed is better

SSL / HTTPS:

Get SELFSSL – iis60rkt.exe from Microsoft

(deselect all options – except SSL) – Install

Start > Programs > IIS Resources > Self SSL

Type command – use standard one, but put V:9995 instead of V:7

In case the secure port 443 has to change, you need to change it here

((need sample command))

((explanation on how to handle multiple sites))

CLOSING NEOSYS SERVICES

Two automatic ways:

• NEOSYS services will automatically initiate a database integrity check, “backup” and close down at 2am by default.

To change the time of the automatic process do F5 ED DEFINITIONS

line 3 is the minimum time to start the backup and shutdown (default 7500 ie 02:00) line 4 is the maximum time to start the backup and shutdown (default 7800 ie 02:05)

both times must be in seconds past midnight

press F5 and type PRINT ICONV(’02:00’,’MTH’) to calculate this easily

• NEOSYS will automatically close down during the upgrade procedure.

Three manual ways:

Warning: NEOSYS services do not shutdown automatically on server shutdown so you need to use one of these methods before shutting down or rebooting a server.

• To close individual services, press Esc three times on a service and then ctrl+C once or twice. Repeat for each service that you want to close.

This can only be done if you can actually see the services on the screen but the services will not be visible if they were started by scheduled tasks while administrator was not logged in to the server … unless you login as /console with remote desktop.

• To close all services for one site/neosys installation, use the NEOSYS Support Menu – Stop/Restart NEOSYS

Currently this has no option to stop the services for any other neosys sites/installations on the same server

• To close all services for all sites and installations of NEOSYS under a particular folder, use NEOSYS maintenance (or any other program) to create and then delete a GLOBAL.END file in the parent folder of all the neosys installations. eg if the installations are located in x:\hosts\clientcode\neosys etc then create and delete a file called x:\hosts\GLOBAL.END

1. In NEOSYS Maintenance press F5 to get a NEOSYS command prompt

1. Type ED DOS ..\..\GLOBAL.END and press Enter

(use ED DOS GLOBAL.END instead if you only want to close the services of the current site)

1. Press F9 to create the GLOBAL.END file

1. Wait until the processes close. Should be almost immediate.

1. Press alt+D twice to delete the GLOBAL.END file otherwise Neosys services will refuse to start

USING RSYNC TO BACKUP SERVERS

Notes

http://rsync.samba.org/

http://en.wikipedia.org/wiki/Rsync

rsync doesnt do any encryption so must be run over ssh

rsync uses port 873

rsync only copies over only the bits of the files that have changed but this is not effective for files like ZIP which are completely recreated.

Setting up rsync server

install rsync using cygwin/setup.exe

To expose /cygdrive/x/neosys folder as name "neosys" without any security so be careful that port 873 is not open

create file /etc/rsyncd.conf

[neosys]

path = /cygdrive/x/neosys

comment = location of all neosys data and programs

to start rsync manually

rsync --daemon

Setting up rsync client

Setup a target folder

md x:\hosts

md x:\hosts\clientname

install rsync using cygwin/setup.exe

Connecting Interactively

tunnel local port 873 to remote port 873 eg by using putty/ssh in the usual way or:

ssh -L 873:127.0.0.1:873 administrator@clientname.support.neosys.com -p 19580

then in a new shell

rsync -avz localhost::neosys/ /cygdrive/x/hosts/clientname --delete --ignore-errors --exclude=/proc --exclude=/cygdrive/[a-z]

(or just –az for warnings and errors only)

Connecting Automatically

(this seems to hang in some cases on cygwin)

Use rsync to issue the ssh command like this:

rsync -az –e “ssh –p 19580” administrator@clientname.support.neosys.com:neosys/ /cygdrive/x/hosts/clientname/ --delete --ignore-errors --exclude=/proc --exclude=/cygdrive/[a-z]

e.g.

rsync -avz -e "ssh -p 19580" administrator@adlined.neosys.com:/cygdrive/d/neosys/ /cygdrive/d/hosts/adlined/ --delete --ignore-errors --exclude=/proc --exclude=/cygdrive/[a-z]

Connecting without password (not best possible security)

On client as administrator

ssh-keygen –t dsa –b 1024 (generates priv/pub keys in .ssh no passphrase for autologin)

chmod 600 ~/.ssh/id_dsa (priv must not be accessible to anybody but owner)

(copy the PUBLIC key to the server)

scp -P 19580 ~/.ssh/id_dsa.pub administrator@servername.neosys.com:/home/Administrator/.ssh/

On server as administrator

cd ~/.ssh

cat id_dsa.pub >> authorized_keys (add the clients public key to the list of auth keys)

chmod 644 authorised_keys (if new then make sure auth keys accessible to other processes)

Back on Client as Administrator to test

ssh administrator@adlined.neosys.com -p 19580 should login without password now

Connecting without password (allow rsync only)

Administrator@una-srvr ~

$ mkdir /home/Administrator/rsync

Administrator@una-srvr ~

$ ssh-keygen -t dsa -b 2048 -f /home/Administrator/rsync/mirror-rsync-key

DSA keys must be 1024 bits

Administrator@una-srvr ~

$ ssh-keygen -t dsa -b 1024 -f /home/Administrator/rsync/mirror-rsync-key

Generating public/private dsa key pair.

Enter passphrase (empty for no passphrase):

Enter same passphrase again:

Your identification has been saved in /home/Administrator/rsync/mirror-rsync-key

.

Your public key has been saved in /home/Administrator/rsync/mirror-rsync-key.pub

.

The key fingerprint is:

b0:a1:bc:b1:fa:7a:d7:2b:76:9d:34:20:ff:d8:ab:19 Administrator@una-srvr

ssh-keygen -t dsa -b 1024 -f /home/Administrator/rsync/mirror-rsync-key

scp -P 19580 ~/rsync/mirror-rsync-key.pub administrator@adlined.neosys.com:/home/Administrator

on ssh server

vi ~/rsync/checkrsync

1. !/bin/sh

case "$SSH_ORIGINAL_COMMAND" in

       *\&*)
               echo "Rejected"
               ;;
       *\(*)
               echo "Rejected"
               ;;
       *\{*)
               echo "Rejected"
               ;;
       *\;*)
               echo "Rejected"
               ;;
       *\<*)
               echo "Rejected"
               ;;
       *\`*)
               echo "Rejected"
               ;;
       rsync\ --server*)
               $SSH_ORIGINAL_COMMAND
               ;;
       *)
               echo "Rejected"
               ;;

esac

chmod 700 ~/rsync/checkrsync