Adline Dubai - CISCO PIX Firewall
Login information
Cisco PIX Firewall IP : https://192.168.0.250
Pass user mode : xxxx
Pass Privilege mode : xxxx
Firewall Public ip : 80.227.111.154 255.255.255.248
Internet gateway ip : 80.227.111.153
Access Information
To access the URL you need to have a JAVA enabled browser with the security settings set to Low, otherwise the control panel doesn't open up.
Port Mapping Method
Mapping ports have two steps, one to create an Access Rule and another to create a Translation Rule, explained below:
Ports to be forwarded
- 19580/tcp on router goes to 19580/tcp on 192.168.0.1 (main server)
- 19581/tcp on router goes to 19581/tcp on 192.168.0.3 (backup server)
- 4430/tcp on router goes to 4430/tcp on 192.168.0.1 (main server)
- 4431/tcp on router goes to 4431/tcp on 192.168.0.3 (backup server)
- 19500/udp on router goes to 19500/udp on 192.168.0.1 (main server)
- 19501/udp on router goes to 19501/udp on 192.168.0.3 (backup server)
Creating Access Rule
To create an Access Rule, to to Configuration > Access Rule and click on New Rule and follow the procedure:
Creating Translation Rule
After creating an Access Rule, to to Translation Rule and click on New Rule and follow the procedure:
Clearing Cache / Old Translation Rules
Once all changes have been done on the router and the console closed, you need to follow these steps in TELNET to clear the cache of the router.
Telnet to 192.168.0.250
Pass as: xxxxxxx (this is the user pass) On the prompt, type enable It will ask for another pass, type here xxxxxx (this is the admin pass) On the prompt, type clear xlate
