Setting up and using remote support

Getting agreement of client IT staff to provide remote support

Letter to obtain agreement of client IT staff to provide remote support

Installing and configuring the server

Installing and configuring SSH

Installing Cygwin with OPENSSH

Watch out for non-intuitive steps like clicking "skip" to install something.

1. Read Avoiding Corrupt Cygwin Installations
2. ENSURE that you are logged in as the local (NOT DOMAIN) administrator
3. Run http://www.cygwin.com/setup.exe
4. Install from Internet
5. Root Directory: c:\cygwin
6. Local Package Directory: c:\cygwin.lib
7. Direct Connection
8. Download Site: http://mirrors.kernel.org (near the bottom)
9. Select Packages: Maximise window then click View once to get Full
10. Next to the package OPENSSH, click the word Skip (once!) to get version 4.4p1-1 or later
11. Next to the package NANO, click the word Skip (once!) to get the latest version available
12. Next to the package DIFFUTILS, click the word Skip (once!) to get the latest version available (required by ssh-host-config)
13. Click Next and complete the installation

Configuring and starting SSHD

Open the Cygwin icon to get a linux/bash command line and type:

Make some changes apparently required by the next step ssh-host-config

chmod +r /etc/passwd
chmod +r /etc/group
chmod 777 /var

Thereafter start with the ssh configuration:

ssh-host-config

Then on the following options type:

Privilege – 	YES
Simp create –	YES
Sshd – 	YES
Sshd Server – 	NO (as it asks you whether you want to use another account)
Pass – 	Create a random password as copy/paste it twice to reconfirm

At the command prompt type

net start sshd

Checking ssh source ip numbers

NEOSYS software will, on running for the first time, lock ssh access to only local and known NEOSYS ip numbers. Upgrading NEOSYS will add and/or remove allowable ip numbers as NEOSYS configuration changes.

It is possible that in some client network configurations incoming ssh connections will appear to be from the clients internal routers with an ip unknown to NEOSYS due to NAT configurations.

Therefore ssh connections will be blocked unless specifically allow the local ip number or it is added into an upgraded version of NEOSYS.

Therefore, after setting up cygwin ssh access AND BEFORE running NEOSYS for the first time do the following:

1. Attempt an ssh connect
2. Locate and the ssh connection attempt in the windows event log
3. Locate the ip number in the event details
4. If the ip number is NOT one of the usual allowable NEOSYS ip numbers then follow the procedure below.

Configuring allowable ssh source ip numbers

DO NOT USE THIS PROCEDURE TO BREAK NEOSYS SECURITY

DO NOT GRANT ACCESS TO ANY IP OTHER THAN CLIENTS ROUTER IPS

in Cygwin command shell

nano /etc/hosts.allow

and insert the line (where 12.34.56.78 is the ip number from the windows event log)

sshd: 12.34.56.78

Trouble shooting sshd

You can run the sshd service interactively to see all messages instead of having to search logs/events etc.

Unfortunately this will not work the same as the normal windows sshd service unless you assume the identity of the sshd_server user. To assume the identity of the sshd_server user you will have to reset its password to something new (since we dont take a record of it during sshd-host-setup) AND ALSO place the new password in the logon properties of the sshd windows service.

su sshd_server
/usr/sbin/sshd -D -p 19580

Reinstalling SSHD if service fails to startup

1. Look in /var/log/sshd.log for errors
2. Delete the following users: sshd and sshd_server
3. Remove the sshd service at the cygwin prompt type cygrunsrv –R sshd
4. Do the above Configuration and starting SSHD step again

Note that you don't have to reinstall cygwin entirely, just sshd with the above steps.

Upgrading SSHD / Cygwin

1. Read Avoiding Corrupt Cygwin Installations
2. Connect normally using ssh/remote desktop etc.
3. Establish another non-ssh vnc reverse connection
4. Schedule an hourly reverse connect of vnc in case you lose the connection. Add the following to scheduled tasks - "C:\Program Files\UltraVNC\winvnc.exe" -connect address.ofneosys.supportstaff::port
5. Make sure you have disconnected the ssh/remote desktop connection at this stage after you have established a reverse connection (i.e. if using Tunnelier, make sure that ssh connection using Tunnelier is not still open and not minimised in the notification area of the taskbar)
6. net stop sshd
7. Delete any bash/rsync and other cygwin related processes in task manager. You can type ps -ef in a cygwin bash console to find out their names.
8. Ensure that you can rename c:\cygwin\bin\cygwin1.dll to xxx and rename back to ensure that no cygwin processes are running. Unfortunately not a perfect guarantee.
9. Upgrade cygwin using the same general steps as a normal cygwin install. If any files cannot be upgraded do your best to kill the offending process and retry. Otherwise you may end up having to uninstall/reinstall cygwin from scratch.
10. net start sshd

How to uninstall/reinstall cygwin

With setup.exe (the installer file of cygwin) you can uninstall individual packages but not Cygwin.

Before you do this, make sure you have stopped the cygwin service (NET STOP SSHD), removed the sshd server (cygrunsrv -R sshd), deleted the users (sshd & sshd_server).

To uninstall Cygwin you have to run the following in DOS prompt:

rmdir /s /q C:\cygwin

You cannot delete the cygwin folder from Windows explorer due to a Access Denied error and this is the best way to uninstall cygwin.

Getting Ownership and Permissions Correct

Installation of cygrin under domain administrator account needs to be fixed as follows:

1. c:\cygin Properties, Security, Advanced
2. Change owner to: Administrators
3. Tick: Replace owner on subcontainers

After changing ownership of all cygwin folders to Administrators all ssh login will be blocked and you will get a windows application event log message. "root" actually means sshd's user which is sshd_server by default or can be found in the cygwin ssh windows services properties under log on

fatal: /var/empty must be owned by root and not group or world-writable.

Fix this in cygwin console as follows:

chown sshd_server /var/empty

Configuring Firewall/Router

You will have to port forward 19580 on the router to port 22 on the neosys server.

Some routers don’t support changing ports so you have to forward port 19580 → port 19580 and use configure SSHD to listen on port 19580 instead of port 22. Instructions for this follow. It is BAD idea to simply open port 22 since an open port 22 attracts scanners/hackers like flies.

Some routers call port forwarding “port mapping” or “virtual servers”

Also configure port forwarding of port 4430 to port 443 or if not possible then port 4430 to port 4430 on server. This is for remote access via https if desired at a later date.

Configuring Specific Client Routers

Adline Dubai - CISCO PIX Firewall

Alto Vista - SonicWALL Firewall

Configuring SSHD to use a non-standard port number

This is necessary if the router cannot forward port 19580 --> 22 and we don’t want to open port 22 directly.

Capitalization is signification in cygwin/linux commands

open cygwin command prompt

cd /etc
chown administrator sshd_config
nano sshd_config (assuming that you have installed the NANO editor)
notepad sshd_config (incase you havent installed the NANO editor)

ctrl+W search for port 22. change 22 to 19580. ctrl+x to save

chown system sshd_config
net stop sshd
net start sshd

How to install ssh on port 19580 over vnc on port 19580

Install vnc on port 19580

connect on vnc

setup cygwin sshd on port 22

test you can login on port 22

ssh neosys@127.0.0.1

change sshd port to 19580 (but it wont start)

schedule a windows system reboot in 10 mins at windows command prompt

shutdown -t 600

change vnc port to 5900 (if will disconnect you)

wait for 10 mins and try to ssh login on port 19580

Error while changing Cygwin port 22 to 19580

Error Message: Could not open file for writring: permission denied

Occurence: Sometimes When you edit the sshd_config file through NANO.

Solution: In SSH shell, follow these commands:

cp sshd_config ashwin_temp (copies sshd_config to a new file ashwin_temp)
rm sshd_config (deletes sshd_config)
cp ashwin_temp sshd_config  (copies ashwin_temp to sshd_config)

Incase it does not copy sshd_config to ashwin_temp, than check whether an ashwin_temp filename exists and delete it using the rm command.

Changing user on Cygwin

On SSH command line:

ssh neosys@127.0.0.1 (where 'neosys' is the username)

Installing and configuring UltraVNC

Download UltraVNC from http://www.ultravnc.com

Run installation – all default options EXCEPT choose INSTALL AS A SERVICE, and START SERVICE.

((screenshot required))

Run ‘Service Helper’ under UltraVNC Server in case you don’t see vnc tray icon on the notification area.

Admin options should make the following changes:

1. Deselect – Enable Java (to increase security)
2. Select – Allow loopback connection (essential for connection via ssh)
3. Select - Loopback only (to increase security)

Installing and configuring the client

It is advisabke to use http over ssh rather than remote access IE inside vnc because the user interface is much faster alhough it might not be so bad using vnc to hosts in the same country

Installing Putty

http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

Download putty.exe > run

Configuring Putty

ssh tunneling local:127.0.0.1:1235-->remote:127.0.0.1:80 so you can do http://127.0.0.1:1235/neosys on your own computer

there are a few computers where it doesnt seem to like the above usually where the target server is on a none-standard port or not listening on 127.0.0.1

so sometimes you have to map local 127.0.0.1:8080 to remote 10.0.0.255:8080 or whatever the listening ip and port is

Source: 1234 Destination: 127.0.0.1:5900 then click Add

Source: 1235 Destination: 127.0.0.1:80 then click Add

Once tunnels are setup then return to Session tab in putty and save the options then click open to connect to the server. Login as administrator with the servers password.

Ultra VNC Viewer:

As the port mapping is complete, enter 127.0.0.1:1234 to login into the computer screen remotely:

Configuring Ultra VNC Viewer Listen mode to use a non-standard port

Troubleshooting Client

Cygwin login on servers connected to any domain controller

If NEOSYS is loaded on a server which is connected to any domain controller, it may require the local administrator password reset.

Troubleshooting VNC client

Resolving VNC Password lockout

If you connect to a client server through CYGWIN and enter the VNC password 3 times wrong in a row, VNC will block you.

As you have already entered the server through CYGWIN, you can reactivate the blocked VNC by using the following commands on the prompt:

net stop winvnc

net start winvnc

Remote Desktop Connection

Changing RDC port from standard to nonstandard

1. Start Registry Editor.
2. Locate and then click the following registry subkey:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber

1. On the Edit menu, click Modify, and then click Decimal.
2. Type the new port number, and then click OK.
3. Quit Registry Editor.